Lubricus
Innovative, Flexible, Adaptable
Lubricus offers a new portal to the world of automatic lubrication. With the highly versatile Lubricus lubrication system, both single lubrication points and a whole group of varied points can be provided with lubricant continuously over a long period of time.
Flexible lubrication
The Lubricus lubrication system is an extremely compact lubrication unit for oils and greases up to NLGI class 2.
The lubrication system works either autonomously with a battery back or using an external voltage supply (24 VDC).
Dependent on the version, Lubricus has up to four outlets and is thus optimally suited for uses with multiple lubricating points.
Lubricus is suitable for the simple and reliable supply of lubrication to bearings, linear guides, chains and open tooth systems, for which special lubricating pinions and lubricating gearwheels are available.
Due to the compact dimensions, the Lubricus is optimally suited for upgrades or retrofitting.
Lubricus B
Simple solution for many applications
The basic variant of the Lubricus lubrication system is battery-driven Lubricus B. This model is available with either one or two outlets and can reliably provide lubrication points with lubricant for up to 36 months. For using an external power supply (24 VDC) Lubricus V was designed.
Product features
- 1 or 2 outlets
- Operating pressure 70 bar (1015 psi)
- LCD-Display & LED
- Quick-Check (backpressure readings)
- Art. no. LUB-B-1 or LUB-B-2
Lubricus V
Simple solution for many applications
The basic variant of the Lubricus lubrication system is Lubricus V which is operating via external power supply. This model is available with either one or two outlets and can reliably provide lubrication points with lubricant for up to 36 months.
Product features
- 1 or 2 outlets
- Operating pressure 70 bar (1015 psi)
- LCD-Display & LED
- Quick-Check (backpressure readings)
- Error readouts possible
Lubricus D
Highest possible degree of control
Lubricus D is designed for an external control and 24 VDC voltage supply. Depending on the model, the Lubricus lubrication system type D has 1, 2, 3 or 4 outlets. A connection to the PLC is required
Product features
- 1 to 4 outlets
- Operating pressure 70 bar (1015 psi)
- Flexible, individual volume assignment
- feedback to the connected unit
- Exact control and lubricant dosing
- Art. no. LUB-D-1, LUB-D-2, LUB-D-3, LUB-D-4, LUB-D-1-1
(2 outlets controlled independently of another)
Lubricus C & Controller
An innovative approach for a wide variety of applications incl. monitoring
The Lubricus Controller is used for external monitoring of Lubricus, to which up to four Lubricus lubrication systems (4 outlets each = 16) can be connected. The connected Lubricus lubricating devices can be individually controlled and monitored using the Lubricus Controller. The dialogue takes place via a simple to operate LCD display.
Your benefits
- Lubricating units are attached close to the actual lubricating points
- Central monitoring is possible (e.g. PLC)
- Individual supply volumes possible
- Monitoring of up to 16 lubrication points
- Electronics and monitoring components can be installed in a user-friendly environment
- Art. no. LUB-C-1, LUB-C-2, LUB-C-3, LUB-C-4, LUB-C-1-1 (2 outlets controlled independently of another)
Lubricus Controller
The Lubricus Controller monitors and controls four Lubricus lubricating devices, which in turn supply a varying number of lubricating points. The paths which the lubricant must travel over in the lines can be kept simple and short, nevertheless central monitoring takes place via the Lubricus Controller. The installation and maintenance requirements are sustainably reduced.