Timken Type E Bearings
BHARAT (Check with Bhavin on how to access TECHNICAL DETAILS FOLDER)
Content from C:\Users\Mitul\Google Drive\M Drive\Common Document Center\Technical Details\Brands\TIMKEN\Products\Housed Units\TRB Solid Housed Units TYPE E
Basic Information
Timken® Type E tapered roller bearing housed units feature double-lip seals and locking collars that protect against water and other contaminants. This double-lip seal design blocks debris and retains grease better than single-lip or triple-lip seals, according to Timken 2012 laboratory tests.
Its cast-iron exterior includes a corrosion-resistant electro-coat finish for the housing and collar, a more durable shield than industry-standard powder coating or black oxide. Set screws with nylon patches reduce back-out, even in rigorous applications.
Premium Timken® tapered roller bearings inside Type E housings are manufactured with advanced technology that results in longer predicted useful bearing life than other housed units with standard bearings. Designed with optimized bearing profiles and improved surface finishes, Timken tapered roller bearings operate efficiently within the housing.
Design Attributes & Advantages
| Timken | Leading Competitor using Non-Timken Bearings | |
|---|---|---|
| Cone | Case Carburized | Case Carburized |
| Enhanced Surface Finish | Standard Surface Finish | |
| Cup | Case Carburized | Thru Hardened, Sourced |
| Timken Matched Cup to Cone | Unmatched Cup to Cone | |
| Roller | Case Carburized | Thru Hardened Rollers |
| Enhanced Profile | Limited Profile | |
| Seals | Double Lip | Single Lip |
| Housing | ASTM A48 Grade 30 | ASTM A48 Grade 30 |
| Electro-Coat Paint | Powder-Coat Paint |
Size Range & Nomenclature
| Housed Unit Configuration | Inches (in) | Metric (mm) |
|---|---|---|
| Pillow Block: 2-Bolt Base | 1-3/16 thru 3-1/2 | 35 thru 90 |
| Pillow Block: 4-Bolt Base | 2-1/4 thru 5 | 60 thru 125 |
| Flange: 4-Bolt | 1-3/16 thru 4-1/2 | 35 thru 115 |
| Flange: Piloted | 1-3/16 thru 5 | 35 thru 125 |
| Take Up: Wide Slot | 1-3/8 thru 3 | 35 thru 75 |
| Take Up: Top Angle | 1-3/4 thru 4 | 45 thru 100 |
Applications
Processing and material handling equipment used in,
– Pulp and paper
– Power generation
– Mining
– Cement
– Aggregate
– Mixing/vibrating
– Ovens/furnaces
– Water treatment and wastewater treatment.
Also widely used in air handling equipment.