Filler Wire (TIG/MIG SS Welding)

TIG/MIG/SAW120

SPECIFICATIONS:
AWS / SFA 5.9 ER 308 L
UNS NO. S30883

Cr-Ni austenitic stainless steel filler wire with controlled ferrite content for TIG/MIG/SAW welding processes. Used for joining and cladding AISI 304, 304 L stainless steels. Suitable for steel grades as below:
1.4301, 1.4306, 1.4308, 1.4312, 1.4541, 1.4543, 1.550, 1.4552, 1.6901, 1.6902, 1.6903, 1.6905.

TIG/MIG/SAW 121

SPECIFICATIONS
AWS / SFA 5.9 ER 316 L
UNS NO. S31683

Austenitic Cr-Ni-Mo stainless
steel filler rod/wire for TIG/
MIG/SAW welding processes. Used for chemical corrosion resistance and cryogenic steels. Suitable for steel grades: 1.4301, 1.4306, 1.4308, 1.4312, 1.4401, 1.4408, 1.4410, 1.4435, 1.4436, 1.4541, 1.4550, 1.4552, 1.4571, 1.4573, 1.4583, 1.4580 and 1.4581 as well as 1.4417, 1.6901, 1.6902, 1.6903, 1.6905. AISI 316, 316L etc. Chemical tanks, valves, pump bodies, agitator blades, impellers, pipelines etc.

TIG/MIG/SAW 123

SPECIFICATIONS
AWS / SFA 5.9 ER 309 L
UNS NO. S30983

Austenitic stainless steel filler
rod/wire for welding dissimilar
steels, AISI 309 SS by
TIG/MIG/SAW processes. Used for welding 25 Cr / 12Ni alloys inwrought or cast forms. Welding of 18 Cr / 8 Ni base metals when severe corrosion conditions exist. Also used in welding dissimilar metals, such as joining 18 / 8 to manganese steel. Applying sheet lining of 12 percent chromium steels to mild steel shells.